Mk4 Bed Orientation & Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friendly reminders for us old guys
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 123
- Wydruki
- 7
- Wyświetlenia
- 762
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: 2/10/24
V2.0 is now uploaded. I needed to rework the part because there is a small outcrop on the Nextruder that was hitting the sign and preventing it from travelling the entire Z height.
I printed it with generic PLA @100% infill. Chose my two colours and in less than an hour it was done. Lay it on it's back and select Supports “ Everywhere ” in order to fill the slot. They were easily removed on my print. Once done slip it over the top cross-member right beside the filament spool holder base.
Unfortunately it won't allow me to upload the bgcode file.