Mk4 Bed Orientation & Size
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.52 – €1.86 net (excluding VAT)
For file: Mk4 Bed Orientation_0.4n_0.2mm_PLA_MK4IS_1h19m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.69 excluding VAT (range midpoint).
- Weight reported by the author
- 29 g
- Print time reported by the author
- 1.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Friendly reminders for us old guys
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 123
- Makes
- 7
- Views
- 762
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
EDIT: 2/10/24
V2.0 is now uploaded. I needed to rework the part because there is a small outcrop on the Nextruder that was hitting the sign and preventing it from travelling the entire Z height.
I printed it with generic PLA @100% infill. Chose my two colours and in less than an hour it was done. Lay it on it's back and select Supports “ Everywhere ” in order to fill the slot. They were easily removed on my print. Once done slip it over the top cross-member right beside the filament spool holder base.
Unfortunately it won't allow me to upload the bgcode file.