Counting matching models…
I first fixed this bust of David by filling some weird holes it had under the top eyelids which would create some imperfections in the print surfaces as well as create some unneccesary overhangs. I also sliced this model to print it in…
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
When I got my first 3D printer last year I wanted to learn to model in Fusion 360 and print useful stuff while also learning the capabilities and limits of FFF printing. So, in this design I was intentionally playing with overhangs and…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
Table vise - 100% printable - no support - optimized orientation Rock solid: this optimized 3D-printed vise effortlessly withstands a 1 kg load thanks to its high-strength design. Create your own using the included STEP files. Dimensions:…
This is a remix of the HSW Flush cutters holders with the pin orientation flipped. The original model had the tapered end of the pin as the end that wasn't attaching to the honeycomb storage wall making it really difficult to insert. This…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Sunlu S2 Dryer PTFE low friction filament guide - no drilling, no glue There are many PTFE filament guide adapters for the dryer but this one: Guide filament in most natural way from the roll to the PTFE tube. In fact it is in parallel…
This is another remix of Bentobox, but this version using 2x5015 fans to fit on Creality K1. The original version of Bentobox uses 2x4020 axial fan. This fan don't have much static pressure to move air through the filters. Radials fans…
Tool to orient magnets on Gridfintiy grids and bins. Make sure to orient the magnets correctly in the tool. Super glue is needed to hold the magnets in place. Original video by Zack Freedman:
First of all - the Honeycomb Wall is great! Find it here: https://www.printables.com/model/152592-honeycomb-storage-wall For my storage, I decided to go off the cuff and orient the panels in landscape mode. To my surprise, there wasn't an…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
I helped someone print these and due to the curved edges and the concerns about the strength of the clips I helped them by modifying this model to print in such a way, that the clips are really strong and where the curved top profile of…
Remixed the ethernet port cover to print in an orientation that makes it far less likely to break off within the port. This orientation also increases the part surface on the build plate - reducing the need for brims. Finally, I changed…
This is a wrench holder that fits Hasky ratcheting swivel end wrenches as well as plain Parkside wrenches. It features: Embossed text for ease of use (the text is recessed, you can use a Posca marker and a scotch brite to make the text…
These are the dry boxes I use to store my standard width spools. These dry boxes can accomodate spools with a width up to 7 cm. Overtur, Amazon, and Prusament do not fit in these boxes. For the wider spools, have a look at my HPL Dry…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
I recommend printing this in PETG or ABS. I used 100% infill as there isn't much difference between sparse and filled for this model. Recommended print orientation is with the base vertical. I used a brim to keep the narrow arms from…
Just reversed the base orientation of both anchors from the original model by Terrywood02
Separated the ball connector and made it printable sideways so it doesn't break when you try to fit it. you just connect both parts after printing.
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
Just put all the files on a single model with the best orientation to print the models I recommend printing at 100% infill, either line or rectilinear pattern, with any filament except flexible materials, but choose a tougher one like…
Floor stand for tower orientation of 2U equipment. I designed this for my APC SMT2200RM2U. Should fit 2200 and 3000 models of APC UPSes (or “schneider electric”). May fit other 2U UPSes and equipment. Be careful not to block any…
I couldn't find a simple flat, vertical divider for longboxes. I've remixed @greatoldone's horizontal bookshelf ones (source: https://www.printables.com/model/55783-comic-book-dividers-filing-tabs ) so that they can be placed…
With this iPhone Stand, you’ll be able to use your MagSafe with any iPhone model—whether it’s the standard, Pro, or Pro Max—regardless of the model you have. It’s designed to provide a solid base on a desk or bedside table so you can…
This a wider F1 body so you don't to place the ESC vertical and is also multi piece for smaller printers and can be multi color. It needs some glue for the lower venturi portion. Please take your time and I recommend not bonding the…
C-clamp - 100% printable - no support - optimized orientation Designed for high pressure: Optimized print orientation ensures maximum stability and superior clamping force. Choose between short and long rods for a standard setup or two…
I found that even with good layer adhesion the original model was not very strong because all forces were being applied in the same direction as the layers instead of in the direction perpendicular to the layers. I remixed the original…
Simple mounting bracket for the Shelly BLU Door/Window sensor. Inb4, not tamper-, theft- or weather-resistant.
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
Wall mount for a Surface 3 Pro and Surface Pro 5 (1796) Tablets in Landscape Orientation. I raised each corner with a gap height of 9.55 millimeters to fix the model. I also added fillets to the bottom edges of each corner to increase…
I loved the model released by Brending3D, but I needed a version that held the plates vertically, as Wham Bam plates do not have the extended edge along one side like Bambu plates do, so they don't sit as nicely in the horizontal mount…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
With the latest craze of Dual-Color/2-Color/etc. filament (where half the filament is 1 color and half is another), an interesting challenge exists: how do you orient your part? MatterHackers (one of the makers/sellers of a brand of some…
This 3D print helps position the magnetic charger for solid contact and worry-free charging of the Sensecap T1000-E in any orientation. Most charging sleds I found rely on the built-in magnets to keep the device seated, which didn’t…
Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…
Six indexed coins to help orientate your multi-colour filament prints and get the colour change in the right place. Multi-colour filaments tend to maintain their orientation once a few hundred millimetres have been extruded but they…
This is a remix of the Samsung Trio Wireless Charger Stand by thesneak155 . I made the adjustments below. No support is needed for the landscape attachment, but painted-on support for a small arch at the back of the stand I added a part…
This is the file I used to print and test my robot is 75mm square, 1.6mm walls, with an X and a Y extending from the sides. I've uploaded a few additional versions. There's another version that's a 50mm square. Then, I've uploaded a 75mm…
This is Honeycomb C, I fixed the orientation so it will fit correctly with the other shared remix. The thick side of the honeycomb wall is supposed to face outward, not inward.
My enclosure doesn't have legs under it and sits on a desk. Therefore I wanted to place my black PSU on the back of the IKEA LACK enclosure with the terminal side of the PSU at the bottom. I based my dimensions on the existing model by…
This thread spool holder is designed to be inserted into a hexagonal panel, allowing for two installation orientations: with the flat face of the hexagon positioned horizontally or vertically. To achieve this, it features a removable…
new style Prusa usb stick case / orientation guide if loose add some electrical tape around the usb stick Printed With supports
I remixed this model for print orientation and more common fittings
Mirror to use the spool on the other side.
Variety of lengths: Rotated Insert Hook 17mm Rotated Insert Hook 25mm Rotated Insert Hook 30mm Rotated Insert Hook 35mm Rotated Insert Hook 40mm STEP files included for remix support not needed if print orientation like in the picture.…
Endstop relocation for X- and Y-Axis for Creality3D Ender 5 WARNING! If you don't do this correctly, you might damage your printer! USE AT YOUR OWN RISK! When installing, DO NOT, I repeat DO NOT USE AUTO HOME! first try: disable steppers,…
Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet…
Printed in Fillamentum PLA. Print orientation as show in the pictures. NO supports. NO raft. Brim if needed.
Din rail mount for BTT 5160 motor driver
Overview I took this model as an inspiration and created my own design with some major modifications: The paper orientation is “landscape” which means that the open side of the paper tray is on the long edge. This is because that tray is…
This sunshade is designed to help you see the screen of your iPhone 11 Pro even in strong sunlight. It also delays the heating of the iPhone in high air temperatures, which normally causes an automatic reduction of the screen brightness.…
I redesigend Silly's stock parts to enable a print orientation, in which layer lines are super smooth. 100% compatible.
PopSocket friendly phone stand that is compatible with vertical or horizontal orientation. For use in making your phone a webcam to supervise a 3D print with Alfred Camera. Can also be used for making videos or taking timed photos. I used…
I am not sure if the ADXL345 sensor requires proper orientation to calibrate properly. The original orientation had the X axis pointing down the Y-axis. This now has the Y-Axis pointing down the Y-Axis.
Maximize your workspace organization with this compact, 3D-printable IKEA Skadis-compatible pegboard. Measuring exactly 200x200mm, it fits perfectly on most standard 3D printer beds and is ideal for tight spaces, desks, or inside…
First attempt at using FreeCAD to edit/combine parts found online, so it's not the prettiest thing ever. Sorry. This piece changes the orientation of the Jsaux Mod Case Strap Attachment from horizontal to vertical. Needed this because all…
--------V1.1 | 11/16/21 ---------- Added 5 inch tall edition that gets it further off the ground. Going too much higher than this will result in not fitting on most printbeds, as well as instability in height/weight ratios with the…
This is a slightly adjusted version of the Accelerometer box from Habony Norbert , For more intuitive closing of the box! The only difference is instead of using 4 grooves on the box (main body), that required the lid to be lined-up when…
Here some more runway modules for direction and order of the runway. L := left ; R := right ; C := center ; Numbers of degrees. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to…
Great bed scraper that makes a super fun fidget toy to help you work out the anxiousness of your next print finishing! The blade bolts are now threaded, so when the blade runs out you just print a new blade, unscrew the threads and pop…
Most files are the exact same files posted by Kallunke in his original release. The only changed parts are stand, exhaust_front and exhaust_aft. These were split into two pieces. The bottom piece prints without support, the top one needs…
Medaile (remix vlastního modelu) tvořená třemi částmi. Třetí část, tištěná z tmavšího filamentu slouží jako pozadí pro “medailonek” se siluetou dítěte. U většiny filamentů stačilo pozadí a medailonek zacvaknout do sebe, někde jsem musela…
Cell phone holder with two orientations: horizontal and vertical. A simple, sturdy, and attractive design. I MPROVED VERSION: The stand has been modified by adding a small tab to hold your phone or tablet more securely in a horizontal…
Design for a vacuum-operated soft mounting system for sanding, routing, polishing, etc of flat and near-flat materials. This is a simplified take on the Festool VAC SYS tool. Suits 45mm vacuum hoses. The 'lip' and 'pad' parts should be…
This is a small adapter to insert on top of the ship's pegs. This adapter allows to tilt your ship at three different angles (-45, 0 45). Pros: Only one part to print (5 min) No other parts to buy (e.g. magnets) Steady orientation. No…
I was annoyed enough by turning the USB stick two times to make it fit. Print instructions printed with a brim because the first print got loose.
I use this little model for my bi and tricolor filaments. It is a 20-minute print, allowing you to quickly observe how your filament behaves during the printing process. The notches around the base are evenly spaced at 30-degree…
X, Y, Z Orientation Calibration Cube with Arrow Stand A great visual reminder of orientation in 3D space for anyone getting into the 3D hobby. Cube size: 30 × 30 × 30 mm Material: PLA Infill: 10% Print settings (Prusa i3 MK3): 0.10 mm…
EDIT 8.5.2022: Mine snapped off. After looking at the 3D model, I discovered a MASSIVE flaw with v1. Please download v2 for the proper strength into that nub adapter. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't…
The Fiio K7 is under desk mount and is designed to house the Fiio BTA30 Pro. This is version 1; therefore, imperfections may be present. This listing will be updated frequently. Please let me know if there are any issues, and I will…
Ground marking of the runway geo orientation. Numbers of degrees. The degree pairings are: 05 - 23 (Schleswig-Jagel WBG, Hamburg HAM, Finkenwerder XFW) 06 - 24 (Sylt GWT) 07 - 25 (Lübeck Blankensee LBC) 08 - 26 (Nordholz NDZ, Kiel KEL) 09…
This is a modification of the battery holder design by enif to allow alternating orientation of multiple batteries. See the original design for configuration details. Update: 3 May 16 - Fixed missing grooves on sides on inner battery…
There are screw holes in the adapter for 2mm screws but after assembly I didn't need to use them. Just super glue.
Two magnetic direction tools meant for magnetizing cohort model options for Warmachine models made by Steamforge Games. You'll notice each tool has a B and around one end, I use this to denote which end magetizes towards the B ody. One…
Support Bracket meant for cupboards. Designed to be printed at an orientation, see slicer screenshot, that improves load bearing capacity. Can be printed at 0.25mm layer height with PETG (PLA not recommended)
The original file is reversed which does not allow for the correct installation of the sleeves.
Simple monolithic non adjustable mounts for Valve's Lighthouse 2.0 Base stations, (not for LH1.0, not tested with HTC Vive LH2.0) ideal for permanently mounting you Base stations, can be used as Wall or ceiling mounts, same hole pattern…
What is this I have used Chris_Hill s modified tension pulley for months now, there is nothing wrong with them but spotted a tiny potential for improvement. With a few small changes it could print better in another print orientation that…
Small rubiccube beads for shoelaces or hoodie strings.. Maybe backpack strings. It has 3 main orientation for the hole in it: Vertical Diagonal Corner to corner You can also find solved, and scrambled versions in the 3mf files! The…
I love Fractal Design's North Pi case but need access to the ethernet port without a cable sticking straight up into the air, so I came up with this modified body for it that would allow for the pi to sit with its ethernet port facing the…
This phone stand can be used in a variety of orientations, making it easy to find just the right angle. The bumps along one edge add even more available angles to use. I recommend printing with a brim. You can change the height of the…
🕹 Vertical NES Stand – Dual-Side Orientation, Wall-Mountable & Support-Free Give your original Nintendo Entertainment System a fresh display option with this custom-designed vertical stand. Engineered to support the NES on either its left…
Pogo pins (10mm): https://www.aliexpress.us/item/3256805576601497.html Other hardware: two threaded inserts (standard Voron M3) and two M3-8mm BHCS to hold the lid on. I have not yet printed this design myself, but plan to soon and will…
There are a few of these wrenches online. This one is made to be printed on its side, with no supports. I printed it in solid PETG to add some weight and strength.
This is simply a copy of my original Pegboard Pass-Through Socket Organizer with the STLs re-exported into a more printable orientation. I would have changed the original, but Thingiverse 404's on the "Edit Thing", so here we are.…
The original kept loading at weird angles and I couldnt get it to lay flat in Orca so I used Cura to make it lay flat.
As I really love the original design, I wanted to make some small improvements for even better gameplay: Lid locking mechanism Prevents the box from unwillingly opening after storage or during play Orientation guides for the 3rd level…
I was asked to create a mount for wall edges. Here we are. There are two versions; 90 Degree Orientation 45 Degree Orientation Recommendation to use screws as in the picture (3,5mmx30mm) 0.2 Layer Heights 5% Infill Calibrated printer,…
This project includes all files necessary to reproduce Plate 1 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/nqp0Ig Designed by…
I was assembling Pirulk's Wingspan Insert and needed to place a small ton of magnets. I'd discovered while assembling my Wingspan Dice Tower prints that getting consistent magnet orientation is critical. So I designed this jig to hold the…
Remix of "3D4U by Miele Flexi nozzle" by @miele_3D4U to enable better print orientation for long nozzles. I wanted to print a long, thin nozzle for cleaning inside my car, but because of the layer orientation in the original the nozzle…
Reversed screw orientation on the arm backplate, as I didn't have screw with exact length to make contact with nut, and not to obstruct quick release mechanism.
This project includes all files necessary to reproduce Plate 4 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/D4KpBQ Designed by…
It's simple, it just takes time! This design resembles a vertical sun dial that can face East, West or South. Use it as a fixed tool to trace the movement of the sun. Grab a paper (or equivalent) and trace the shadow cast by the indicator…
This is a mounting holder for the entire Xiaomi scooter charger, designed to be directly attached to the scooter using zip ties. It is a convenient solution for carrying the charger on the go, especially for commuters or riders who want…
Most of the Philips Hue mounts that I found for use with the Ikea Skadis system only allow you to orient the Hue bridge in a vertical orientation. In my setup I wanted to route the cables to the side for a cleaner appearance. I liked the…
Initially created to help visualize orientation of ships in the game Attack Vector, it is useful in games with similar mechanics, such as Squadron Strike and Birds of Prey. Pitch and roll are indexed in 30 degree increments. The dots…
This project includes all files necessary to reproduce Plate 7 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/FEFoew Designed by…
This project includes all files necessary to reproduce Plate 2 of the TaTaBook "Orientation and Mobility". To download the corresponding audio files visit the SOML website under: http://link.socialmicrolearning.com/kMS8-A Designed by…
