1 / 2
Magnet Orientation Block / Jig for 10x1, 8x3, 6x3 — image 1
1 / 2

Magnet Orientation Block / Jig for 10x1, 8x3, 6x3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnet Orientation Block to help keep magnets in a consistent orientation

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
238
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I was assembling Pirulk's Wingspan Insert and needed to place a small ton of magnets. I'd discovered while assembling my Wingspan Dice Tower prints that getting consistent magnet orientation is critical.

So I designed this jig to hold the three kinds of magnets I commonly use. I then printed two of these. In one jig, I have all of the magnets in one orientation and in the other jig, they are in the reverse orientation. (Yes, I could do this with one jig, but I found flipping the magnet upside down after removing it from the jig was awkward and making a second jig is trivial.)

Parameterized Fusion 360 export included.

Note that my photos represent a previous version of this jig. In the current version, the text is larger and the middle one is now 8x3 instead of 8x2.7.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

15%

Filament: Hatchbox PLA White, Light Blue Post-Printing =============

I used CA glue to affix the magnets to the jig, being careful they were all in the same magnetic orientation.

How I Designed This

I measured my magnets and drew it up using User Parameters and a design timeline in Fusion 360. Feel free to download the source document if you have differently sized magnets.

Category: Hand Tools

Tags