1 / 4
timing belt tensioner on dual z axis (with idler) — zdjęcie 1
1 / 4

timing belt tensioner on dual z axis (with idler)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Timingbelt-tensioner-plate with idler for the Ender 3V2 which is being used for dual z axis on the ender 3

Ocena
0 / 5
Polubienia
5
Pobrania
88
Wydruki
0
Wyświetlenia
633
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

---Made for ender 3 v2, but you could use it on other ender as well---

What is this? Its an timingbelt-tensioner for the dual z-axis on the ender 3, because they tend to skip e-steps. Thus one side is higher or lower, creating a misalignment on the printer x axis. The tensioner does keep the belt tight so the axis are in synch. 

Info:

This model was created because the aliexpress seller wrote its suitable for the ender 3, but it isnt for the ender 3 V2! So I created this model, as seen on the first picture as a reference the black original part V.S. mine printed in red.

 

To be found under:

https://www.aliexpress.com/item/1005004978910589.html?spm=a2g0o.order_list.order_list_main.56.31bd5c5fqrCOfO&gatewayAdapt=glo2deu


With following description:

3D Printer Dual Z Axis Lead Screw Aluminum Kit Timing belt width 6mm Gear 20 teeth for CR10/Ender3 3D Printer

 

Print settings:

  • 100% Infill
  • PETG
  • with brim

Afterwork:

  • cut a M5 0.8mm  thread into the 4.5mm whole, so the idler-screw is easy to screw in

 

Tagi