Heated Insert Press (4040)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Heated Insert Press for those who only have a piece of 4040 extrusion kicking around.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I wanted to build a heated insert press but only had some 4040 extrusions kicking around. I couldn't find any premade models from it, so I borrowed ideas from multiple sources and made my own.
All my M5 bolts were also 2mm short, so I found a model and printed some.
The design is also for use with string/paracord rather than a piece of belt because that's just what I have on hand.
For the weight I use a giant bearing, so I've added a bonus hollow sphere which can be filled with sand and blocked off with hot glue. I haven't printed or tested it though.
All are designed and modified in Tinkercad, so no nice code files are available.