Just Another Deburring Tool Wall Mount (2-way deburring tool with holes and without) Mk3.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mounted holder for your deburring tool!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 126
- Wydruki
- 1
- Wyświetlenia
- 388
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design has a small cup-hole that enables the tool to sit straight no matter if you prefer to insert it upside down or right side up as shown in the pictures.
Other designs have a refill blade storage section but I find that unnecessary since this design can hold the refills inside (by opening the black tip).
Might update it with a 45 deg support under the stands, for added rigidity, but it's working fine for me.
The pictures show the hole-less version, but one with screw holes is available in the files.
This file can be printed laying on its back for quicker, support-less printing, but do note that the holes will be prone to breakage if you pull out the tool improperly, it happened to me once.