Just Another Deburring Tool Wall Mount (2-way deburring tool with holes and without) Mk3.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mounted holder for your deburring tool!
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 126
- Makes
- 1
- Views
- 388
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This design has a small cup-hole that enables the tool to sit straight no matter if you prefer to insert it upside down or right side up as shown in the pictures.
Other designs have a refill blade storage section but I find that unnecessary since this design can hold the refills inside (by opening the black tip).
Might update it with a 45 deg support under the stands, for added rigidity, but it's working fine for me.
The pictures show the hole-less version, but one with screw holes is available in the files.
This file can be printed laying on its back for quicker, support-less printing, but do note that the holes will be prone to breakage if you pull out the tool improperly, it happened to me once.