Stream Deck/ Marco Keyboard with Volume Control
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dante made this awesome Stream Deck/ Marco Keyboard, just beautiful! I just added some volume knobs to it.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I just raised the body of Dantes controller and added space for the knobs (KY-040) then added a small “slip” to slide the “lock” in to ( only if you want to use the “push” button ( i dont ).
It is a “snugg” fit but it works.
Dante have added some awesome instructions on how to solder the buttons in place (thanks again) i did find this code also which had support for the knobs ( KY-040).
https://github.com/mensikv/VMs-macro-keyboard/tree/master
Thanks to mensikv for this.
Used the same pins as Dante but named them differently in the ardurino code - ref: https://www.researchgate.net/figure/Arduino-Pro-Micro-connections-pinouts_fig2_338345202
Just changed the combination of keys from 8 to 12 and the sequence from 16 > 10 to not run out of memory.
#define NUMBER_OF_KEYS 12
#define MAX_COMBINATION_KEYS 4
#define MAX_SEQUENCE_KEYS 10
Works like a charm! Thats to both for making this avalible