1 / 2
Foothole Covers for Strada (and similar) Velomobiles (FreeCAD) — zdjęcie 1
1 / 2

Foothole Covers for Strada (and similar) Velomobiles (FreeCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Better aerodynamics and keeping the cold outside – with virtually unbreakable foothole covers.

Ocena
0 / 5
Polubienia
0
Pobrania
44
Wydruki
0
Wyświetlenia
408
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 

The idea is self explanatory, I guess.

 

For those of you daring enough to make changes to the design: good luck! I did not make the FreeCAD project very user friendly to edit. 
 

With the sk_Master sketch, the basic shape of the velomobile shell is defined. I took the "strada_veeren" image from the velomobiel.nl website as a template.

 

The basic dimensions like width and length are assigned in parameters spreadsheet.

 

The most tricky part is to define the shape of the covers by changing the wireframe in Fachwerk sketch.

 

If the model breaks (and the chances are high) it's a good start to un-do the boolean fuse of FussHubbl (cover) and Kleberand_mit_Loch (border) bodies.  – You have been warned.

 

Printing

Printed in TPU, 0.6 mm nozzle, 0.25 mm layer height, brim, no supports; see 3mf file attached for details.

 

Other materials, like PETG also work. I did all prototypes in PETG until I decided to take TPU for it is virtually unbreakable.

 

Printed in a material like PETG, the model can also be used as a mold for laminating CFK / GFK.

 

Assembly

Best method so far to stick TPU parts together: sand all contact surfaces with a rough grit and clean them with alcohol. Put a thin layer of "Pattex extreme repair" on each part, press them together and then let the glue cure long enough.

Tagi