Prusa Edition Tabletop Fingerboard Skateboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prusa Edition of my solid fingerboard
- Ocena
- 4,857 / 5
- Polubienia
- 103
- Pobrania
- 599
- Wydruki
- 10
- Wyświetlenia
- 2234
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
Easy to print Skateboard you can play with on your tabletop or other places.
It flips jumps and drives nice and is very durable. Perfect for all age groups :)
Prusa edition: It has the Prusa name engraved :)
You will not need any glue due to slim tolerances.
I cut of the seams at the axis inserts to avoid their unevenness.
Tipp: Assemble the Wheels with a vice!
Have fun printin, assembling and playin :D!
PS: If you have Problems with tight tolerances try to Print all parts but the Axis in 101% . You can divide parts and scale them Up in your slicer! But then you might have to glue the wheels to the Axis later.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
150
Infill:
100%
Filament:
Prusament PLA & DC Plastics PLA
Notes:
Use supports with the board! Axis, Axis inserts & Wheels dont need Supports.
Avoid an elephant foot!
Round Axis part with 0% infill & 1 Perimeter to avoid seams.
Print 0,1 - 0,2 mm layer hight.
Category: Toys & Games