1 / 4
Fractal F65 & Pro, F75 & Pro Max Whoop - Official 3D Printed Files
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of all 3D printed parts for the Fractal Whoop series FPV quadcopter
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 709
- Wydruki
- 1
- Wyświetlenia
- 2878
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (2)Kolekcje (68)Powiązane
More info here for kits and BNF
Print the cam holders in TPU, 0.3mm height, 0.48mm width.
F75 Pro Max Ducts:
Experimental, print at your own risk 😛
Print in PETG, PA or HIPS; any high impact plastic should do.
Then insert the struts into the duct tabs, heat up your soldering iron to your print temp (~240c) and melt the tab into a mushroom to rivet the strut in place.
Put your feedback in the comments, I'm curious to know how it prints for you and how we can improve it together.