Discovery Falcon School 3d Printing Elective Challenge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Welcome to the Discovery Charter School 3d printing challenge. You must successfully slice and print all 3 of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Welcome to the Discovery Charter School 3d printing challenge.
You must successfully slice and print all 3 of the attached models to complete the challenge. Once you've completed this challenge you can find and print your own models
Do these challenges in order.
Prerequisites:
- AppStream / Prusa Slicer link in your email:
- Watched the video from the email with the links
Challenge 1 – Window Frame (from @dezign)
Slice and print this model using the following parameters:
- Layer Height: 0.24mm / Draft Mode
- Infill: 20%
Objective: Learn how to slice and successfully print a model in under 1hr
Challenge 2 – 30min Sphere
Objective: enable build plate adhesion and supports to successfully print the model. Adjust settings to be as close to 30 mins print time as possible.
Challenge 3 – Orientation Model
Objective: Find the orientation that allows the model to be printed without unprintable overhangs,cuts or supports then print the model
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Category: Other