Discovery Falcon School 3d Printing Elective Challenge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Welcome to the Discovery Charter School 3d printing challenge. You must successfully slice and print all 3 of the…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 31
- Makes
- 0
- Views
- 126
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Welcome to the Discovery Charter School 3d printing challenge.
You must successfully slice and print all 3 of the attached models to complete the challenge. Once you've completed this challenge you can find and print your own models
Do these challenges in order.
Prerequisites:
- AppStream / Prusa Slicer link in your email:
- Watched the video from the email with the links
Challenge 1 – Window Frame (from @dezign)
Slice and print this model using the following parameters:
- Layer Height: 0.24mm / Draft Mode
- Infill: 20%
Objective: Learn how to slice and successfully print a model in under 1hr
Challenge 2 – 30min Sphere
Objective: enable build plate adhesion and supports to successfully print the model. Adjust settings to be as close to 30 mins print time as possible.
Challenge 3 – Orientation Model
Objective: Find the orientation that allows the model to be printed without unprintable overhangs,cuts or supports then print the model
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Category: Other