Hydroponic NFT Downspout Horizontal Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These brackets will fit the 2"x3" vinyl downspouts sold at Lowe's or HomeDepot. They should work well for a hydroponic…
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 157
- Wydruki
- 0
- Wyświetlenia
- 1195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
These brackets will fit the 2"x3" vinyl downspouts sold at Lowe's or HomeDepot. They should work well for a hydroponic setup or on the side of your house.
My hydroponic system is mounted horizontally on supports instead of vertical like the original so the mounts needed to be changed slightly. I made the adjustments using TinkerCAD.
This is a remix of Hydroponic NFT Downspout Brackets by @GMoi. His end caps are spot on.
If this design/remix helped you out, consider buying me a coffee
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
.25
Infill:
30%
Filament: Any Recommend ASA
Category: Outdoor & Garden