1 / 2
Festool Plug-It Adapter for Makita BO5041 orbital sander — zdjęcie 1
1 / 2

Festool Plug-It Adapter for Makita BO5041 orbital sander

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Housing for the Makita BO5041 orbital sander to fit a Festool Plug-It Adapter

Ocena
5 / 5
Polubienia
7
Pobrania
58
Wydruki
1
Wyświetlenia
723
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

!Do this modification only if you are comfortable with electronics and a little tweaking!

!Also at your own risk!

Needed parts:

  • Festool spare part (489925)
  • Shrinking hose
  • Round head wood screws 3,5 x 15mm  (Ø-Head 7 mm)

Installation:

  1. Solder the original connectors to the Plug-It Adapter, length about 90mm
     
  2. Push the Plug-It adapter into the Housing an secure it with two Round head wood screws 3,5 x 15mm
  3. Mount the housing to the Maktia BO5041 with the screws form the original stain relief and connect the wires as before

     
  4. Assemble the Top part 
     

Addition: 
Maybe you need to cut out the Top part like this:

I cant tell if still necessary, because during testing i did this cut out.

Filament: extrudr greentec pro (or ABS, ASA, PETG etc.)

Print settings:

  • orientation: see picture
  • layer height: 0.12
  • wall generator: arachne
  • wall loops: 4
  • Top/bottom layers: 6
  • infill: 15% gyorid
  • support: yes, paint on like this: