Large Catch-All Workbench/Desk Tool Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
34,34 € – 41,97 € netto (bez VAT)
Dla pliku: Catch-All Revised_0.4n_0.2mm_PLA_MK4IS_1d1h8m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 38,15 € netto (środek widełek).
- Masa podana przez autora
- 749 g
- Czas druku podany przez autora
- 25,14 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Workbench/Desk Tool Organizer for the majority of my tools that I have amassed during the purchase of my printers.
- Ocena
- 4,75 / 5
- Polubienia
- 151
- Pobrania
- 1012
- Wydruki
- 3
- Wyświetlenia
- 5579
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I came across this model on Facebook and grabbed it off of Makerworld. Original author had a different set of cutouts. I filled back in the basic shape of the organizer and made specific cutouts for the tools that I had on hand. Everything has it's own home. I removed some depth and the the center caliper hanger. It measures 220x190x110.
Printed in 26 hours on an MK4 w/input shaper 0.20 speed preset. 3 perimeters, 6 top layers, 4 bottom layers, top fill layer monotonic lines, adaptive cubic infill @10% - utilized 700-800g of Sunlu Grey HS-PLA. Painted on supports below the hangers. Probably not necessary - but didn't want to find out they were needed and waste the print.
Only major problem was that the top fill on the two upper levels have some small gaps - yet the lowest level has a perfect finish. Has to do with my slicing settings. But not sure why it occurred.
Tinkercad presets round objects to 20 sides, and I did not increase it to the maximum 64 sides - so all the large rounded objects fit but most of the allen wrenches were to large for the slots they were made for. The caliper hanger could be higher so the calipers actually hang - the jaws rest on the ledge. I also did not calculate for the overhang of the red scraper on the top right so one of the holes I made for a blue-topped tube of cleaning needles is empty.
Tools in the organizer:
Tools that come with Prusa MK4 Kit and Ender V3 KE
Tool kit: https://www.amazon.com/gp/product/B0CKXHBP9Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (used 3M VHB to hang magnetic strip with knife blades)
Screw Measuring Tool: https://www.printables.com/model/208880-rapid-metric-screw-measuring-tool-m2-m5-up-to-50mm
Radius Measuring Tool: https://www.printables.com/model/280185-fillet-radius-finder-innerouter-design-reference-r
Scraper: https://www.printables.com/model/122894-hexscraper-printbed-scraper
Nextruder Change Tool: https://www.printables.com/model/555330-mk4-nextruder-nozzle-change-tool
Tweezers: https://www.printables.com/model/83864-precision-tweezers-v2-3d-folding
Mini Hex Drivers: https://www.amazon.com/gp/product/B09CKXDB47/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Caliper:
https://www.amazon.com/gp/product/B07VSVMWTJ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Depth Caliper:
https://www.amazon.com/Shexton-Digital-High-Precision-Electronic-Calipers%EF%BC%88Black%EF%BC%89/dp/B09958X4SH/ref=sr_1_4?keywords=tread+depth+caliper&sr=8-4
Threadlocker: https://www.harborfreight.com/automotive/lubricants-adhesives/adhesives/threadlockers/threadlocker-no-42-10-ml-medium-strength-65192.html