Office or Cubicle wall nameplate plaque with interlocking holder

UPDATE: 2/09/2024 
Updated the Top, Middle, and Bottom interlocking nameplate holders (INH). Files are:

TOP INH-7.stl, MID INH-7.stl, BOT INH-7.stl

I removed the embedded TOP,MIDDLE,BOTTOM text and replaced with a simple up arrow ^ in the top left corner of each holder. I felt that if you print this in 2 colors, the base color being the same color as the base of a actual nameplate, then when you remove a nameplate, it will show as a blank. See photo attached today with a Maroon base and White framing. 

UPDATE: 1/24/2024 
REV2 uploaded
Rev 2 of the model files for nameplate holders adds a slight overhang to the holder to better grasp nameplates. Previously nameplates were held in place in the holders strictly by tension. Now there is a slight lip in top and bottom of the holder to better secure nameplates in place.

Original
I decided to create my own cubicle nameplate. Measures 202x50mm. Can add text using pause when slicing to print in 2nd color filament.

Holders include a single nameplate holder as well as 3 interlocking holders. The interlocking holders can be used to group nameplates together on wall with any number of combinations.

3 names plates (Use Top, Middle, Bottom)
4 or more nameplates (Use Top, Middle, Middle,…., Bottom)
Designed to print in place and snap together for a really tight fit with a clean look.

I will post some examples very soon.

Print settings:
(Nameplates and holders) I was very successful using Prusa MK4 with PETG (.2mm Structural resolution, MK4 Input Shaper 0.4 nozzle, 15% infill). No supports required! 

(Nameplates) Prusa Slicer (2.7.1) inserted Filament change at 1.8mm level. Thickness of base nameplate is 1.6mm, Name sits atop base nameplate at 1.6mm, but is additional .92mm high.