Office or Cubicle wall nameplate plaque with interlocking holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holders include a single nameplate holder as well as infinite locking holders for grouping nameplates snap together.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 76
- Makes
- 0
- Views
- 628
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
UPDATE: 2/09/2024
Updated the Top, Middle, and Bottom interlocking nameplate holders (INH). Files are:
TOP INH-7.stl, MID INH-7.stl, BOT INH-7.stl
I removed the embedded TOP,MIDDLE,BOTTOM text and replaced with a simple up arrow ^ in the top left corner of each holder. I felt that if you print this in 2 colors, the base color being the same color as the base of a actual nameplate, then when you remove a nameplate, it will show as a blank. See photo attached today with a Maroon base and White framing.
UPDATE: 1/24/2024
REV2 uploaded
Rev 2 of the model files for nameplate holders adds a slight overhang to the holder to better grasp nameplates. Previously nameplates were held in place in the holders strictly by tension. Now there is a slight lip in top and bottom of the holder to better secure nameplates in place.
Original
I decided to create my own cubicle nameplate. Measures 202x50mm. Can add text using pause when slicing to print in 2nd color filament.
Holders include a single nameplate holder as well as 3 interlocking holders. The interlocking holders can be used to group nameplates together on wall with any number of combinations.
3 names plates (Use Top, Middle, Bottom)
4 or more nameplates (Use Top, Middle, Middle,…., Bottom)
Designed to print in place and snap together for a really tight fit with a clean look.
I will post some examples very soon.
Print settings:
(Nameplates and holders) I was very successful using Prusa MK4 with PETG (.2mm Structural resolution, MK4 Input Shaper 0.4 nozzle, 15% infill). No supports required!
(Nameplates) Prusa Slicer (2.7.1) inserted Filament change at 1.8mm level. Thickness of base nameplate is 1.6mm, Name sits atop base nameplate at 1.6mm, but is additional .92mm high.