Counting matching models…
Version 2 Neu: Höhe 150mm - kompatibel mit Boxen Höhe 50 + 100 mm / gleiche Verbinder New: Height 150mm - compatible with boxes height 50 + 100 mm / same connectors…
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
This is a model I made for a physics assessment for school, and thought I would upload it for other makers. I apologise if the instructions aren't clear as I haven't designed it around being constructed by others, but I will try my best…
This is a 1/10th scale compressor and rattle gun for the workshop as decoration or other. The rattle gun is Snap On style and would usually be red and comes with a 55mm nut that would usually by black, the compressor is made as to be…
made on TINKERCAD also follow me here and subscribe to "SAMI STUDIOS (SG_128)" pls it helps a lot
I made a small wall cabinet that uses an Ikea Skadis - stile front panel. A TP-Link 8-port switch ( TL-SG108E ) hangs on the lower side. The upper side is suitable for accessories. The wooden cabinet has long sides measuring 360 mm x 160…
Nozzle holder for baku 852 smd rework station. Nozzle diameter 22 mm. Require 2 magnet bars 19x9mm
3D Printing Cost & Profit Calculator - Comprehensive Excel Tool for Makers and Businesses Take control of your 3D printing expenses and profit margins with this easy-to-use Excel sheet, specifically designed for 3D printing enthusiasts,…
Are you a multi-disciplinary idiot? Is one of your idiot disciplines 3D printing? Look no further than this sign! Warn all your friends and relatives to be on guard when around you. Inspired heavily by @RettiSeti 's Interdisciplinary…
I redesigned hybridtracer's insert, because I wanted the whole accessory box in one piece. Before printing make sure that the big insert can fit into your original box, because I designed this for my winter edition patchwork! Category:…
This device aligns two pieces of wood at a specified angle as a helping hand and alignment tool. I am using these to test dry-fit of my plywood cabinetry using biscuit joints. These make it a breeze to work with one joint at a time…
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
Bracket you can use to mount your cooler to your boat.
The magnet is slightly off-center. that for me kept the blanks in nicer. It's designed for lapping films. If used with leather strops, it will change the sharpening angle due to the leather's thickness.
Thickend the tube and made the fuse hole 0.5mm smaller
As in, this is taking Forever… Framework 13, fully modular, desktop/laptop. Mount, case and EGPU dock. This is an attempt to replace my desktop replacement Clevo P870TM with 9700K and full speed RTX2080. Its a desktop replacement…
This is a take on Jay Doscher's Cube Frame for ITX, a modular server rack. Twin cube design was used to accomodate for Framework's rectangular profile. Everything can be printed without support, and put together using M2.5 screws (you'll…
Through the bizarre combination of having access to a laser cutter but only a small 3D printer, I have designed and produced a minimalistic yet bold showcase of the Framework Mainboard. This case features space for a Wi-Fi card and…
I like the modular design of FilarworKs Master Spool, but for me it was lacking some features. I wanted an area to stick a label to without it being unsupported at large portions My refill-filament was too wide for the standard…
I was looking for a holder to store my Workzone De-/Magnetizer in a gridfinity manner. Unfortunately, I havent found any. Eventually, I had to design my very own holder for this purpose. Gridfinity is the ultimate storage system, created…
Install it with the side with the thicker “wall” on the right side of the blaster
EN ( FR plus bas) 3 clamping jaws Small and Medium can be reinforced with M4x35 mm screws A 10x2 mm circular magnet slot is provided on all three models for storage on the workbench leg when not in use. 3 .step files available 3 .stl…
Dies ist eine Ablage für das Dethleffs Just90 Wohnmobil zur Montage unter den Schränken am Kopfende. Es passt Genbau unter den USB Anschluss. Praktisch zur Ablage der Mobiltelefone.
Modification of badge holder received at my work. My ID kept falling out, so I redesigned it with grooved notches at the bottom so that the ID has to be forcibly lifted (with low force) out of the holder and can't fall out accidentally.…
Printed in PLA Grid is lower profile due to Z axis clearance of the drawer Per j03y “Using the Prusa slicer fast .4 profile I changed the infill to lightning, top/bottom solid layers to two, and infill to 10%” If you want to generate your…
I originally modified this Multiboard Holster for my personal muzi.works H1 Heltec V3 setup to make charging my Heltec V3 more convenient.
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
This is two combined models a Toyota Racing Logo Scraper from Thingiverse and a Honda Logo inserted into the handle of the Ice Scraper. Doesn't require any supports, I printed it in PLA and I will test it this winter if needed. I may also…
YouTube video - watch it! ER-15 is a toy that mechanically is a slingshot and is NOT A FIREARM and you can use for target practice around the house ER-15 - Ekcnheb The “ER-15” was created after the success of the model "E200" to improve…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you the Cute Hardworking Boys, a worker figure for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-).…
Multiple different vaccum adapters for my workshop tools made from TPU. A generic vaccum adapter, an adapter for my jointer and an adapter for my electic handplane
Youtube video: https://www.youtube.com/watch?v=UuBXoj44C6Q I made and or customized the following models to use for my workshop tool organisation. have a look below.
These are replacement trays for the widely used small parts organizers offered frequently from Aldi (Workzone), Lidl (Parkside) and Allit (Basic 33, VarioPlus Hobby). I maxed out dimensions of the the trays and kept it as simple as…
I needed a brick man model for stop motion video, but could not find one that would not fall apart at the slightest bump. So I started from scratch and designed one that will stay togeather. I have two trays .. one for most of the parts…
Clips designed to help organize cables in server racks. Available with both horizontal and vertical guides. Each clip only uses about 2g of filament even with supports.
Concrete Knock Box Formwork | DIY Set for Home Baristas Create your own durable and stylish knock box with this 3D-printable formwork. Designed for PLA or PETG, this formwork allows you to cast a professional-grade knock box from…
Working V6 engine , engine block from @Prusa research, pistons, crankshaft and stand made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be…
Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…
This battery adapter lets you make a powerful worklight with your Metabo 18V tool batteries. You need: Suitable LED Light Small spring, ca. 5mm diameter, 10-15mm length. 5x M3x16mm screws for Case 1x M3x25mm screw for Lever Toggle switch…
Toyota 22RE Mini Version Made as a desktop miniature, or as a rough representation of how the real thing works (only the pistons and crankshaft move), the crankshaft is able to be hooked up to an electric motor. Makes a great thing to…
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
Working I4 engine , engine block from @ericthepoolboy, pistons and crankshaft made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be used…
These are simple punches for tapping in inlays in 3D printed and wood objects, and for tapping together tight fitting pieces. There is a wider square-tip option and a thinner round-tip one. They are 75mm long. I made them just big enough…
Simple modular network cable comb for 4 cables that can be expanded. Can be wall mounted or just a comb. Multiple combs can be connected to expand capacity.
I (re-)created my cheap, mobile and small home cockpit which consists right now of a wooden box (50x46x15cm) standing on my right and a special holder for the Airbus Style Joystick and Tiller. The main Pedestal consists of the Spoiler ,…
Beacon Simmetric Holder Reworked for QIDI Plus4
After the students have received instructions, the students go to work independently. The tool is to announce if the students are available for questions/help from other students. The question mark is if the student has a question for the…
Ersatzantriebsrad für Dremel Bohrständer Workstation 220 drive gear for Dremel Workstation 220 drill stand
Start with white, then switch to black at 2.2mm, red at 2.8mm. 3mf added with color changes. With/without holes. Designed for single color printers! Just add pauses and change filament!
This is a work in progress, just posting a preliminary version to gauge interest. If you desire to work on it from the point that I have it, you are more than welcome to. Some details for those who would like this project: This is…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
Edit log: Date: 05.10.2025 | First Upload So far, whole rack is designed for 250x250x250 mm beds on the 3D Printers. In the future I will upload version for 180x180 mm beds, especially for A1 mini fans ;). Date: 05.11.2025 | First Upload…
Support pour monter une box tools sur un sworks tarmac sl7, ceux dispo sur le site ne me convenais pas. l'angle de la fixation est parallèle au top tube. lien vers la box tools…
After a long search for a portable charging box, here comes the design. Snap fit and perfect close, slot wider to fit most common usbC cables. Single print with PLA. Designed in Onshape, let me know if you need a link to personalize the…
Woodworking Joint Bridge - mixed to print flat for additional strength. I printed in black PETG. Strength: 4 wall lopes and 40% sparse infill density.
An air-inlet spacer for the Framework Laptop 13 (AMD Ryzen 7040) which fits on Prusa i3 mk3 print-beds. Based on Choumarin's bottom spacer for framework laptops . For a quick summary, see Differences of the remix compared to the original…
This is technically a remix of the Hexes for LEGO mini figures (re-modeled) by @Nat_ Although I have redesigned this in Fusion 360 from the ground up I have marked it as a remix to credit them, please note this reworked version does not…
Don't throw away your YardWorks grass trimmer, print a replacement head for it! For model 060-2342-0. Recommended to be printed in PETG, ABS or PC. No supports are needed.
My wife loves buying the foaming Bath and Body Works foaming soap dispensers. I always thought the bottles didn't match the theme of our house. I went ahead and made a holder for the dispensers. I have two different versions depending on…
Parametrical Screwdrivers Holder (Solidworks), to change you need to use Solidworks 2022 or later
Since the box of Oranienburger Kanal is so big I thought I could store another great 1-2 player game from Uwe Rosenberg inside it as well. Please note: The drawers are oriented in a way so the bottoms are in the center so you can grab the…
Take working mortar shell prints, then attach the detonator you will take from any pump action shell to the end, fill it with explosive, put a nail on the end to activate it and tape it lightly.
Q1P PRO Filament cutter(启迪Q1P 切刀) 切刀 切刀座 缓冲器，基于拓竹5通 刀座制作过程。how to make cutter: https://t.bilibili.com/1000611059391791122?share_source=pc_native
Remix of the remix of Network Cable organizer for HSW, print in place version. No suports required. Printed in a Bambu A1, PLA, 0.28 layer height, no support.
added grip indentations to the lid, extruded the SVG of the tools into STL using tinkercad.
Recently, I made a trip in Manchester and i got impressed by the omnipresence of the worker bee iconic logo. I found it interesting and wanted to put it into a decorative object. I bought battery-powered LED string lights like this one to…
⬇ Files for download are available on Files → Other Files → Flick 19X Files. All project files are in .zip archive ⚔ Toy guns are back. ⚔ ⬇ Files for download are available under the Files tab. All project files are in .zip archive Flick…
A remixed version of the Mighty Shrub "Ex" BCAR Front End for use with the standard Worker plastic SCAR
Screw design to attach to the bottom of lightsabers purchased/assembled from Savi's workshop. Suggested use is to print two then soldering them together to create a double bladed lightsaber, if not then perhaps use a lighter to slightly…
A replacement jaw/clamp for a wokmate portable work bench (the original Black and Decker Workmate. Best printed with a more flexible filament to prevent the tangs from snapping. I have used PLA versions even with broken tangs as they hold…
[Work in progress] Experience racing games on a whole new level with our open-source racing seat! This self-built seat, perfect for VR gaming, offers an immersive and user-adapted driving experience. What's still missing : Pedal housing:…
i'm always tinkering with something and lately i've been making parts for myself and friends for the catalyst super slam nasty racing frame. fixed angle cam mounts. flip stick mount and a rear mount that holds vtx antenna, rxsr receiver…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
⚔ Like a Flick 19X. But much better ⚔ ❤ Subscribe to my Boosty https://boosty.to/myuto There is a free subscription, you can read news, see announcements and take part in polls 🎥 Full video uploaded! -> https://youtu.be/1q5rlmCZgGU ⬇…
A space-saving stand designed to hold your caliper and scraper right next to your 3D printer or on any workbench. Keeps tools upright and accessible without taking up much room. Perfect for maintaining a tidy and organized workspace. Like…
Server Rack Cable Run Clip for 1.5" (38mm) Ladder Tray Rail Tired of messy, unsupported cables dragging down the aesthetics and airflow of your server rack? This custom-designed 3D printable cable run clip provides an essential, tool-less…
I didn’t like the stock TCA flap lever — it lacks the normal A320 “lift to move” action, which led to accidental position changes. So I designed a replacement flap lever with a proper pull-to-move mechanism and tactile detents. It feels…
Due to the way Fusion works on imported converted meshes, sometimes you get weirdness (and occasionally even impossibility), and this one is a good example of weirdness. It left an incredibly thin layer of excess skin on the top and…
Framework consisting of threaded tubes which shall be used to carry textile as housing for a 3D printer Uses customizable threaded tubes ( https://www.thingiverse.com/thing:1657392 ) designed by Hristo Lankov (itzo). Category: 3D Printer…
A card stand used to hold up cards, easy to print and looks pretty cool. Check out my other models! use the 2mm version, it is better for holding cards, but if you're using something thinner like paper, then use the 1mm.
Working spring scale for toy kitchen. Uses up to 3 pen springs Print settings: Material PLA infil 5-10% (for pinion gear 20% or more) walls 2-3 supports enabled (I used auto, organic) Assembly guide: Insert pinion gear: Place the pinion…
This is a remix. I needed to make it fit with my FNIRSI HS-02A soldering iron with CNC Kitchen C245 Installation Tip Adapter . I can highly recommend this set! :) Made for M3 x 20 and M3 nut. I printed the v8 with PA612-CF and it requires…
Mounting plate and support/brace to complement HPGlass 's bench roller model. I didn't have PVC pipe on hand but I had plenty of M3 hardware laying around. Support rod needs 2x M3 FHCS screws. Any length between 10-15mm should be fine.…
I got tired of cleaning my desk, I also don't own a workshop vacuum so I've created this simple mod for the Dremel workstation. It clips tightly on the nut in the botttom, and can be additionnally secured with a zip tie on the top part.…
I fixed a few issues I had when printing the original by "frmdbl": Strengthened the prongs at the top by attaching them to each other with a ring, so it doesn't bend too much during printing and ruins overhangs. Thickened the bottom cone…
Hey there, Makers! 👋 Meet the ERM-15 – a fully 3D printable toy rifle platform inspired by the iconic AR-15! This isn't just another blaster; it's a modular system with multiple configurations to suit your style. Whether you want a clean…
A stair climbing attachment for the Workzone type 27839 foldable hand truck from Aldi / Hofer. It allows you to slide heavy goods up and down the stairs relatively easily, without “crashing” the hand truck on each step. The climbing…
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled.
Here’s my marble racing project featuring a motorized elevator and a modular track. The build isn’t fully complete yet — some support pillars are still missing. The motor mount is designed for a 130 micro motor, which will need a small DC…
I created this small sanding block to use with my leatherwork; specifically, to sand edges of leather before burnishing (smoothing). I was inspired by a wooden design…and will eventually make them out of wood but was easier and faster to…
All parts are printed in PETG with: layer height of 0.2 mm 4 to 5 perimeters 4 to 5 top and bottom layers 25% infill with grid pattern It might be useful to chase the threads.
Can Am Outlander G3L work light mount Hardware 30-35mm M3 bolt to work as hinge pin. 2pcs M6 bolt to fix mount around bumper tube.
Standalone case and optional display stand for use with a framework 16 mainboard and display. The display stand utilizes the built-in mounting points on the display, enabling simple but sturdy mounting. The original mainboard case model…
One CupTag moves from morning coffee, to canned beverages, to water glasses, to wine glasses easily. I love these for parties and gatherings to not lose my cup. Even better, you can use ANY vase pattern as the unique marker Included:…
A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. This model was…
About This VESA plate allows you to mount a compatible monitor or TV in a bicycle workstand. Its clamping area is a 36mm “tube-section” that fits neatly in the jaws of the workstand with no sharp corners. The top-end is filled so that it…
update 1/25/26: fixed the stem parts not laying flat and the base having an extra piece printkits.com monthly project for December 2025 find details of this project at:
![N-Works Sim racing rig [WIP]](https://media.printables.com/media/prints/78c0fa8d-5db6-476d-b1b7-3fedec33717e/images/10603080_86eba914-275b-42c1-96dd-c59e808dc6aa_5c113db5-b7f7-49a0-94db-689a5297d189/20250809_140705.jpg)
