1 / 3
YADS - Yet Another Drawer Solution - Workzone Aldi Parkside Lidl Allit - No Gridfinity
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiple drawer replacements for every need. Easy to print, easy to use.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 53
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are replacement trays for the widely used small parts organizers offered frequently from Aldi (Workzone), Lidl (Parkside) and Allit (Basic 33, VarioPlus Hobby).
I maxed out dimensions of the the trays and kept it as simple as possible. Bottom and top have a slight bevel so you can stack them if needed. I also didn't go fancy on labeling things - just use a Sharpie or a labeler like a Dymo.
Dimensions
- Width: 68 mm
- Length: 125 mm (without grip)
- Height: 36 mm
- Wall thickness overall: 1.2 mm
- Bottom bevels: 3 mm
Printing
- Optimized for a line width of 0.40
- Layer height of 0.20 is suitable
- Print time ranges from 45 to 80 minutes (any Bambu Lab) for each drawer
Enjoy! And post a Make if you printed some! Thanks! 🍺