Counting matching models…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…
couchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouchcouch
This is my design of fully functional corner brackets. I created them especially for the FFF process to be printed using PETG or ASA material. If these corner brackets are printed with the correct settings and materials, they can…
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
This is a very basic table for any RPG, such as Dungeons and Dragons, Pathfinder, etc. It measures 1 inch by 2 inches and is to scale for miniatures of that size. It only uses 2 meters of filament, so it can be a great addition to your…
Tis is a piece to protect your Amazon basics lightning cable from breaking
I wanted the Basic Board cover to match the cover of the LCD panel, so I made a remix without the hexagon imprints on the top. Printed with Prusament Orange PETG. The printer settings are the same as the original: 0.30mm DRAFT PETG 15%…
A collection of rulers I designed to help with drawing basic physics diagrams and other kinds of schematics primarily targeted at students who need something small that contains basic shapes as well as ellipses. I couldn't find a ruler…
Der eingebaute Ständer der Uhr, um sie auf ein Sideboard oder einen Schrank zu stellen hat leider einen viel zu flachen Winkel und lässt sich auch nicht einstellen. Daher habe ich diesen einfachen und schlichten Sockel entworfen, der die…
Cable grommet to prevent your USB cable from slipping out of a management hole. I use this to keep my USB cables accessible through a port on my Uplift desk without worrying about them falling back through the hole.
This is a handle for a school project where you make a hydraulic marble maze. I made a handle for it but it looks like it can be used for anything so do as you please and use it or modify it to whatever you need it to fit
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
Every metric nuts from M2 to M20.
Print this model to fine-tune and test your slicer settings and get rid of annoying stringing. This is the original, Basic Stringing Test by Loohney with over 160,000 downloads on other platforms. Angus from Maker's Muse has an excellent…
A simple deck box, with room for 100 double sleeved cards, and magnetic latching. The key feature though is the quick swappable and customisable badges, allowing the deck boxes to be customised to the game or deck that you are playing.…
I came across this calculator for an acoustic diffusor and whipped up a basic static model of it: http://www.mh-audio.nl/Acoustics/DiffusorCalculator.asp They call it a skyline diffuser. Update 12/17/2022 : it looks like this link has…
Yellow Reach Stacker (Basic) - Fully Functional 3D Model(1:30 scale) This is an assembly model which requires use of glue. Reach stackers are the giants of the container yard—precise, powerful, and endlessly fascinating. Their ability to…
This is a basic model of an Arduino Nano that I made for testing dimensions and scale of my projects. It features all of the 30 Dupont connector pins on the bottom, as well as the 6 Dupont connector pins for the serial port on top. It…
This tests ironing flow rates, 5%-25%, this was created with Orca Slicer 2.3.2 Feel free to change settings to your liking
This print is specifically designed for the basic WiFi board straight out of the box, omitting features such as the antenna and SD card slot. This creation is a remix of magdong's Wi-Fi Dev Board Case (…
A basic two basket hydroponics set up Category: Outdoor & Garden
Constructed using https://www.printables.com/model/916851-denali-screwdriver-holder-hsw model of the screw driver and the footprint of the bitholders and extension. Used gridfinity refined for the base. Changelog: v1 → v2: Added tolerance…
I've uploaded wheels in 45mm and 50mm diameter, bearing takers and straight to axle type. I recommend 45mm for most anti frames but let me know if you would like other sizes added. I've also added a fusion 360 file which has a template…
Assembly Video coming soon…. Best for printing each part at 55-75 % scale. I have not tested each part on the bed, Im currently printing each part, some parts to make functioning it will take a few drill hole. for example… the…
Basic backpack Hanger in a closet to save some space
These are various geometric shapes that are easy to scale. Each has an edge length / circumference diameter of 10mm, with a centred origin. Have fun with these shapes and any suggestions are welcome!
This is a Basic Display Shelf/Stand for your Cars in the Scale 1/64 (Hot Wheels, Matchbox, Majorette …. With it, you can display your coolest cars. For you I also made a single version if you want fewer or more subjects. You can put the…
Basic Firepit 1:64 Scale City and Farm Displays
Basically, this is a relatively easy mod that drops both CPU and GPU temperatures while running the fans at lower speeds which also resulting in much less noise. It is specially optimized for Noctua NF-A12x25 fans and FDM printers. To get…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This basic creature token is…
Parallel Plier Parallel Zange Some parts must be printed multiple times: 2x brakets 2x handles_l 2x handles_r 4x 5mmbolts 4x7.5mmwasher 2x spacers 4x bolts Enjoy the print and usage. If you feel that I earn it, please send a tip or…
Simple pot that I designed that is meant to perfectly fit the dirt base of ForgeCore Monsterra. It is printed with PLA, 0.2 mm layer height, cubic adaptive infill @ 15%. I do a layer change at the groove toward the bottom.
Both pieces will print successfully without support. The filler piece needs a brim for buildplate adhesion unless you've got a really good setup. Make it in several colors to chain them together!
This is remixed holder to fit 5mm tube
Requires pair of two. Simply hooks in the air vent. Print in any material available. Dimensions can be adjusted to fit your phone (if needed) using the OpenSCAD file provided. Holders can be easily be removed, stored, and re-deployed in…
Pretty simple design. Just slide your kindle in from the bottom. The kindle stays firmly in-place with friction, and needs a fair amount of effort to remove. The goal is twofold: Firstly, make the Kindle easier to hold with one hand while…
Ruler with electronic components for university/work. Includes: circle ⌀10, switch, resistor, capacitor, voltage source, inductor, diod, letter ‘’V'' and ‘’A'', dot. Printed 0.2mm height, 15% infill, PLA+ Perfect with 0.9mm mechanical…
Basic Everyday Clip A simple, reliable, and easy-to-print clothespin designed for everyday use. This model focuses on clean geometry and efficient functionality Printed as a single piece, this clip requires no supports and is optimized…
I printed in TPU 95A, 0.20mm layers, 3 walls, 10% gyroid. The only thing I would change is dry the TPU more and NOT use the random scarfed seams :) (at least with this specific spool of TPU). Definitely not meant to be used as a real wine…
A simple stencil to draw lines on a blank page.
Dungeon walls like these are nothing new, but I know how hard it is to make a choice when it comes up to other designs. I will always find something I want to change, so I go and make it myself right away. These are simple basic dungeon…
I made this mount so I could use Command strips to secure the NUC under my desk without having to remove the rubber feet. This mount is designed fasten to your NUC using two M3 x 8mm socket cap screws on the bottom. I've included the .f3d…
Da ich es sehr unübersichtlich finde viele Einzeldateien zu sortieren/zuzuordnen, habe ich die Baugruppen zusammengefasst. Die Baugruppen können auch wie zusammengeführt gedruckt werden, aber ich denke das kann jeder für sich selbst…
Remix of the existing Narex chisel mount, but for mounting to the wall instead of a peg board.
Ikea Skadis - Amazon Basics (Denali) Screwdriver Holder
basic T gun / CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
A simple wall mount for all shelves in the Hexagon Shelf lineup that allows for stacking of shelves. They have a hole for a standard M5 screw. No supports are needed for printing. Print in a stronger material such as PETG. Use at least…
Printed Cormangos cars with the DKS-Basic chassis. Unfortunately this chassis has no differential onboard. Fortunately there is one from the Open source Project OpenRC F1. Use the gears, especially the flat one need an bigger inside to…
Printed in PLA with gyroid facing downwards on print bed, no supports required.
The most basic Arduino case we could design in Tinkercad It only takes two screws to lock the board in place but the case is snug enough and you likely won't have to.This is the first of a series of educational projects and will be the…
You can use it to connect the female CAMLOCK fitting to the port on an Amazon Basics Vacuum Compression Space Saving Storage Bag .
A basic pass through twist cone fidget, easy print less then 45 minute print with correct settings any filament but i recommend PLA Basic.
Printed in PETG, but PLA would certainly be fine too.
This is a basic slider replacement for a bifold type door, i print it upside down without support.
I needed an outdoor enclosure for my aquaponics pump timer/controller using a simple Sonoff Basic. This slim case suits 20mm conduit fittings allowing me to insert the timer/controller inline with the existing 20mm plastic conduit. There…
This is a simple, no frills "No Trespassing" sign. 160mm x120mm. When you live next to public property you have to have a few of these!
This is a basic case for the Espressif esp32-s31 Function-Coreboard. Screw holes are M2.5, perfect fit for SPAX Universalschraube 3x12mm T-STAR plus VG. Print tested with PETG without supports, works fine. Quite basic just with holes for…
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
This is a modified version of the mount that replaces the Morrigan seats with GM3 mount and at drivers eye view. The VTX mount continues to support the 40mm fan but has been modified slightly to fit the CADDX VTX v2. Its pretty rough…
Modified my coffee warmer stand to make a Business Card Holder with magnetic mounts. Up to 96mm wide cards. Space on the back for two 10mm magnets that measure 2.8mm thickness. Edit: Added file with “Take One” added as label. Edit2: Added…
Electrodode “Electrical Dodecahedron” Project Concept : A dodecahedron where each face displays three fundamental electrical formulas for each quantity: Current, Voltage, Power, and Resistance . Target Audience : Students, teachers,…
I have always made functional things and wanted to learn how to sculpt. Using Nomad on the iPad, I followed along a tutorial, though from start to finish I can say it is 100% my files design.
Organizer for tool box Qbrick sustem PRO 600 Basic
A set of 4 dice, 2 dice with numbers, and 2 with symbols. Use whatever dice work for the skills being practiced. 2.5 hour print
The goal of this model is to offer school objects to demonstrate shapes and volumes. Even if the creation of those is simple (basic 3d shapes + fillet) having them at hand may be usefull. I also included freecad design file for easy…
Poker chips are way too expensive in where I live and these are quick and easy enough to print in batches to accumulate over time. They are standard chip size of 40 mm diameter and 4 mm thickness. Accents are slightly protruding outside…
I created a series of small boxes for holding stuff inside my toolcase I use as an event technician. This box contains my Swissonic Basic Router (MK2). The router is secured with the lid so the antennas wont break. Beneath the Router…
Zemistr 3D has created several videos on how he performs timelapses, which provided a foundation for how I wanted to approach it. After some testing, I developed this workflow, which differs slightly from Zemistr 3D's method. Check the…
Made this for my desktop speakers to sit on to be off my desk. my print didnt need supports. pretty simple long ish shelf.
Background Information This model is a starter blender model of a basic doughnut, and is featured in both the Basic Modeling iFixit guide and Sculpting iFixit guide . If you are interested in learning the basics of Blender consider taking…
Grip scaled to fit the Kindle Basic instead of the paperwhite.
just a little makercoin for anyone to print and/or remix
Janipur Bowl Basics 2 – Simplistic Modern Design, Durable Functionality, and Customizable Elegance Transform your everyday spaces with the Janipur Bowl Basics 2 , a thoughtfully designed, multipurpose bowl that blends simple aesthetics…
These are the Temple Fortress -- Basic Building Blocks, which go with four other additional accessory blocks and pieces in this set. See below for the links for the other groups of pieces. UPDATE 2026-04-26: Uploaded an additional piece,…
📈 Help me growing! ☕Or buy me a coffee: https://buymeacoffee.com/psoa This model is free to download for personal use under the standard Printables license . If you'd like to support my work — and help me keep designing and sharing more…
Basic wheel with a 4mm diameter hole for an axle
Basic Book Prop - Pages Turning
These are very simple, undecorated plain containers for AA and AAA cells. Placed side by side on the slicer you can possibly merge 2 or more to create larger units. Designed to be very economical on plastic and quick to print.
Those pieces will allow you to make a basic but effective scabbard for your Esker standard feder. You will need plastic glue and a plastic pipe of those dimensions : Length : around 93cm (I recommend mounting the schilt part and then cut…
The top hole is only 1.2mm and the slot is 0.6mm wide, so if your filament is soggy, your slicing is bad, or your printer isn't set properly, you might have to print a second time. The good news is, it'll come in around 0.25g of filament…
Simply print this, then pop out the old overly tight bitholders and pop in the new printed ones. I included the F360 file in case you want to tweak the size of the hexagons to your liking.
I bought a new Amazon Basics Ratcheting Screwdriver only to realize they didn't match my previous ones with the slight knurling on the shaft. This model provides a knurling to the entire shaft. I recommend printing this model with a raft…
Needs tree Supports for the holsters and uses the same settings as the mini 13 model
There are the basic parts for Robotic League Home education. Holes are for M3's and centers have distance 8mm between.
A very simple business card holder. No supports needed. No brim needed if your bed adhesion is good, otherwise a brim with some post-processing should work fine. There are two models. I found the basic Business Card Holder.stl worked for…
