Stackable Box Basic Double Triple Tall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Get your things organized with tactical precision! The Tactical Storage Crate Drawer.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 31
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
📈 Help me growing!
☕Or buy me a coffee: https://buymeacoffee.com/psoa
This model is free to download for personal use under the standard Printables license.
If you'd like to support my work — and help me keep designing and sharing more models — you can purchase it through my store for $5. Think of it as a tip or donation: you get the exact same files, and I get to keep doing this.
Either way, thanks for printing! 🙏
🔩 Stackable Storage Box System — One System, Everything Organized
A modular, interlocking drawer system for your desk, workshop, bench or safe. Snap the boxes together side-by-side or stack them tall — build the exact drawer array you need and expand it whenever you want. Smooth sliding drawer, front label slot, and a clean rugged look.
Yes, it started as an ammo box — but it's really a "store anything" system:
🔋 batteries · 🔩 screws & nuts · 🧲 magnets · 📎 paper clips · 💇 hair clips · 🪵 clothes pins · 🗒 post-its · 🎣 tackle · 💊 pills · 🧵 sewing bits · 🔫 ammo & calibers · …basically anything small that keeps getting lost.
👉 Every box in the family lives on my profile — check the full lineup and grab the sizes you need.
.
.
.
.
.
.
📦 The full lineup
Box | Outer size (mm) | Outer size (Inches) |
|---|---|---|
Label | 43 x 21 x 0.8 mm | 1.69 x 0.83 x 0.03" |
Mini | 70 x 73 x 48 mm | 2.76 x 2.87 x 1.89" |
Single | 138 x 73 x 48 mm | 5.43 x 2.87 x 1.89" |
Double | 138 x 143 x 48 mm | 5.43 x 5.63 x 1.89" |
Single Tall | 138 x 73 x 93 mm | 5.43 x 2.87 x 3.66" |
Double Tall | 138 x 143 x 93 mm | 5.43 x 5.63 x 3.66" |
Single Tripple Tall | 138 x 73 x 138 mm | 5.43 x 2.87 x 5.43" |
Double Tripple Tall | 138 x 143 x 138 mm | 5.43 x 5.63 x 5.43" |
All boxes share the same interlocking system, so you can mix and match freely — a wall of minis next to a couple of tall drawers, whatever your stuff needs.
🎯 Custom inserts — already made, more on request
Each box can carry a custom insert to hold its contents in place — think caliber trays for ammo, or dividers and grids for screws, batteries, bits and beyond. I've already modeled a few (like .22LR and 9mm) and I keep adding to the set.
Need an insert that isn't here yet — a caliber, a battery size, a specific screw tray? Drop it in the comments and I'll model it and share it. Tell me the box size + what you want to store, and it goes on the list.
🧵 Print settings (why the .3MF is set up this way)
The included .3MF is dialed in and ready to slice — this took a lot of test prints to get right, so you don't have to:
Model in PLA (printed here in PLA Matte) — clean finish, tight tolerances.
Box support in PETG — I deliberately print the drawer's support in PETG because it pops off far cleaner than PLA-on-PLA. No fused, torn supports, no fighting the drawer free. This is the single trick that makes the sliding fit feel right.
Bambu Lab P1S + AMS, 0.4 nozzle, 0.2 mm layers, 2 walls, 15% grid infill, tree supports.
No AMS / single-color printer? You can still print everything in one material — you'll just spend a bit more time cleaning the drawer support.
⭐ Support the project
If this saves you time, a like, a boost and a follow genuinely help — and they're what let me keep pumping out new sizes and new inserts. Keep everything in its place, and don't forget to give me that nice boost. 🚀