1 / 1
Air Combat Extruder Spinner (F-16s vs Mig-29)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Watch these aircraft dogfight in the friendly skies above your print!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Is the Mig-29 chasing the F-16 or the other way around? You could watch this air combat play out for hours while your print grows!
Both aircraft are at the same scale.
Instructions:
- The 3mf file is ready to slide with a color change at the right layer.
- You can also assign colors using a multi-material printer.
- Recommend 0.15mm layer height with supports.
- Print face up so the top layers are smooth (use ironing if desired)
Glue (epoxy) a magnet (8mm or smaller) to the back and attach to your extruder as shown to watch the action!