1 / 8
AirPods Pro 1. and 2. Gen Tips sizes S/M/L
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AirPods Pro 1. and 2. Gen replacement tips for 1ct per piece
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 436
- Wydruki
- 1
- Wyświetlenia
- 2158
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 5)Remiksy (0)Kolekcje (43)Powiązane
Replacement tips for Apple AirPods Pro 1. and 2. Generation in three sizes S/M/L that I made for my guests to sanitarily use my AirPods. Print in TPU or TPE for squishy, comfortable fit. M size should fit in general, S is for kids in my opinion. I tested the tips on 1. Gen AirPods Pro but they were reported to also fit for 2. Gen AirPods Pro.
Printing parameters
- Layer height: 0.2mm
- Nozzle: 0.4mm
- Material: TPU or TPE (I used eSUN TPE with shore hardness 83A), best dried before use
- Slicer settings: be sure to tick ‘avoid crossing walls’ and ‘print sequence by object’ instead of ‘print sequence by layer’ to reduce stringing to a minimum
- Support: no
- All three pairs print in 23min on my P1S
- Costs: 1ct per piece
The tips snap on the AirPods. Twist slightly left and right a few times with a little push to secure the tip. All three sizes have perfect fit with the MagSafe case.