Ikea Expedit/Kallax Glass Shelf Supports - 12cm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the use of Kallax glass shelves without needing to drill or screw into the shelf
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 844
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Allows the use of Kallax glass shelves without needing to drill or screw into the shelf. It's also useful for sliding the glass in and out to remove things from the back.
I remixed this to fit taller 40k models such as Knights and Flyers on the upper shelf while allowing space underneath for smaller tanks and walkers. The shelf has a 12cm section below and a 22cm section above.
If you want the shelf to be in the middle (16.5cm above and below) check out the original by Eric here: https://www.printables.com/model/467938-ikea-expeditkallax-glass-shelf-supports
