Counter pressure filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A counter pressure filler for homebrewers
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A counter pressure filler for homebrewers
You need to print 2 parts of the Sideblocks, 2 and 3 way blocks and the spring.
Inside the spring you can place a steel spring to stiffen it up if you want.
The length of the 2020 profile is up to you. Make it as big as you want. The lengths I used are:
Verttical: 540mm
Length: 160mm
Width: 200mm
The filler I used is this one https://nl.aliexpress.com/item/32929693589.html?spm=a2g0s.9042311.0.0.27424c4d6TZwfV
I used some Ball-locks I had laying around to be able to easily connect the CO2 and beer line to the filler.
Print SettingsRafts:
No
Supports:
No
Resolution:
0
Infill:
50%
Filament brand:
E-SUN
Filament color:
White
Filament material:
PLA+
Notes:
Sliced with SuperSlicer and printed with 0.2mm layer height.
To make it all a bit sturdier I used the Gyroid infill pattern.