Counter pressure filler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A counter pressure filler for homebrewers
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A counter pressure filler for homebrewers
You need to print 2 parts of the Sideblocks, 2 and 3 way blocks and the spring.
Inside the spring you can place a steel spring to stiffen it up if you want.
The length of the 2020 profile is up to you. Make it as big as you want. The lengths I used are:
Verttical: 540mm
Length: 160mm
Width: 200mm
The filler I used is this one https://nl.aliexpress.com/item/32929693589.html?spm=a2g0s.9042311.0.0.27424c4d6TZwfV
I used some Ball-locks I had laying around to be able to easily connect the CO2 and beer line to the filler.
Print SettingsRafts:
No
Supports:
No
Resolution:
0
Infill:
50%
Filament brand:
E-SUN
Filament color:
White
Filament material:
PLA+
Notes:
Sliced with SuperSlicer and printed with 0.2mm layer height.
To make it all a bit sturdier I used the Gyroid infill pattern.