Modular Tupperware Lid Holder + Extension Inserts (Customize to your own needs!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the original's simplicity; This just adds the ability to make it your exact length you need! (Plus inserts!)
- Ocena
- 4 / 5
- Polubienia
- 103
- Pobrania
- 576
- Wydruki
- 1
- Wyświetlenia
- 2595
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
How to print;
- 0.2 layer height
- Gyroid infill at 15%
- 2 walls
- Pegs facing up
About:
I liked the original's simplicity; But I wanted the freedom of anyone being able to make it as extended as their personal needs required. Everyone's Tupperware varies so crazily, it makes it difficult to choose one of these things to print. I get that. That's why I remixed what I consider the most simplistic and practical designs by @icepower.
I printed mine pegs in the air direction. This way, your tolerances can be nice and tight. I found 0.2 hole tolerance perfect for pushing it together, but not easily coming apart. Tighter than this required light hammer taps, which I didn't want to require. If your printer isn't tuned, you might require a few soft taps of a mallet (DON'T mallet the pegs, just the wall next to it is fine).
There's an extender as well if you're looking to expand the width between tall walls. 👍
Can't wait to see what people make (or add, if you're feeling creative and want to remix / contribute!)