Bed Scraper Holder - Ender 3 / V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick print of a simple, yet practical design for your pesky bed scraper, that doesn't fit in the printer drawer!
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 97
- Wydruki
- 3
- Wyświetlenia
- 342
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The 3D model is showing upside-down, because of the no support printing.
I printed it at 200/50 *C, no supports, 04 nozzle, 180 mm/s, infill is at your choice! (i did it at 5% for more rapid prototyping)
This holder fits quite well in the side of the Ender 3 (3V2) gantry profile.
For the installation, you might want to chip the edges of the connector part, because it is a pretty tight fit to hold well. Might need a few slams to slide in.
It has practical slanted edges for you to quickly slam the scraper in it, wasting less time.