ESC Mount and Battery holder for Kyosho Burns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of converting a Kyosho Burns from a nitro model to brushless electric.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 238
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
There's not much room to convert a Kyosho Burns to electric but it's doable. This model is for holding a 3s Traxxas battery and ESC. It includes the main holder and standoffs for mounting to the chassis.
The ESC is a Traxxas Velineon VXL-4s High Power Electronic Speed Controller, Waterproof (Brushless) (fwd/rev/brake). The mounting screws are M3 so you need to tap the holes to M3 or modify the model to print the threads. Also, for the screw on top of the battery either cut the screw or all washers to prevent the screw for interfering with the battery.
I drilled and tapped the chassis and mounted the part with #4-40 screws I had on hand but M3 would work just fine as well.
This is not the most efficient design for 3D printing since there are a lot of supports but I just need one of these so I didn't spend much time optimizing. If you want to optimize the design, there is certainly room to do so.
This car won't be sitting on the shelf as much anymore!! :)