1 / 4
ESC Mount and Battery holder for Kyosho Burns — image 1
1 / 4

ESC Mount and Battery holder for Kyosho Burns

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is part of converting a Kyosho Burns from a nitro model to brushless electric.

Rating
5 / 5
Likes
3
Downloads
27
Makes
1
Views
238
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

There's not much room to convert a Kyosho Burns to electric but it's doable.  This model is for holding a 3s Traxxas battery and ESC.  It includes the main holder and standoffs for mounting to the chassis.  

The ESC is a Traxxas Velineon VXL-4s High Power Electronic Speed Controller, Waterproof (Brushless) (fwd/rev/brake).  The mounting screws are M3 so you need to tap the holes to M3 or modify the model to print the threads.  Also, for the screw on top of the battery either cut the screw or all washers to prevent the screw for interfering with the battery.

I drilled and tapped the chassis and mounted the part with #4-40 screws I had on hand but M3 would work just fine as well.

This is not the most efficient design for 3D printing since there are a lot of supports but I just need one of these so I didn't spend much time optimizing.  If you want to optimize the design, there is certainly room to do so.

This car won't be sitting on the shelf as much anymore!! :)