Modular License Plate Frame - 4-Piece Design for Printing on Any Bed Size
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular design implemented for easy printing on almost any printer. "PIZZA MAN" is optional, printed separately.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Print Details
- All pieces were designed to be printed on a Creality Ender 3 or larger. (Minimum Bed Size: 220 x 220 x 250mm / 8.6 x 8.6 x 9.8 inches)
- "PIZZA MAN" lettering is totally optional and printed separately. Any lettering can be glued on top of frame.
Print Settings
- Frame Pieces - 100% Infill (Because the frame is thin most slicing software will slice with 100% infill)
- Supports: None
- "PIZZA MAN" lettering - 20% Infill (To get the lettering effect shown in photos, set top and bottom layers to zero in slicing software, then use 20% infill with Gyroid pattern)
- Supports: None
Assembly Tips
- Pieces can be held together with license plate bolts only. If four screw are not available the frame can be glued together
- If gluing, a good choice is J-B ClearWeld Glue for Plastics
Support my Creations, Buy Me A Coffee!