Modular License Plate Frame - 4-Piece Design for Printing on Any Bed Size
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular design implemented for easy printing on almost any printer. "PIZZA MAN" is optional, printed separately.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 67
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Print Details
- All pieces were designed to be printed on a Creality Ender 3 or larger. (Minimum Bed Size: 220 x 220 x 250mm / 8.6 x 8.6 x 9.8 inches)
- "PIZZA MAN" lettering is totally optional and printed separately. Any lettering can be glued on top of frame.
Print Settings
- Frame Pieces - 100% Infill (Because the frame is thin most slicing software will slice with 100% infill)
- Supports: None
- "PIZZA MAN" lettering - 20% Infill (To get the lettering effect shown in photos, set top and bottom layers to zero in slicing software, then use 20% infill with Gyroid pattern)
- Supports: None
Assembly Tips
- Pieces can be held together with license plate bolts only. If four screw are not available the frame can be glued together
- If gluing, a good choice is J-B ClearWeld Glue for Plastics
Support my Creations, Buy Me A Coffee!