Prusa XL spool holder base for M3x20 and M4x20 screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 2
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base.
I have on my spare parts from the XL kit only one M3nEs nut over. And who the hell has an M5x85 screw at home?
So I did an remix, a bit ugly, but it get's printed without troubel, and the part does his job.
- Printer profile: 0,20mm FAST
- Filament type: PETG black
- Infill: Gyroid, 25%
Use a washer between the screw and the hole in the base. I printed it at 150% speed, without problems.
You will find the other 2 needed parts under "XL printable parts" → “Spool Holder”
One M3nEs nut should in the left over parts from the assembling.