1 / 1
Prusa XL spool holder base for M3x20 and M4x20 screws — image 1

Prusa XL spool holder base for M3x20 and M4x20 screws

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base.

Rating
5 / 5
Likes
3
Downloads
43
Makes
2
Views
337
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

If you want to make a sixth spool holder with the spare parts from the kit, you will need a different base.

I have on my spare parts from the XL kit only one M3nEs nut over. And who the hell has an M5x85 screw at home?

So I did an remix, a bit ugly, but it get's printed without troubel, and the part does his job.

  • Printer profile: 0,20mm FAST
  • Filament type: PETG black
  • Infill: Gyroid, 25%

Use a washer between the screw and the hole in the base. I printed it at 150% speed, without problems.

You will find the other 2 needed parts under "XL printable parts" → “Spool Holder”

One M3nEs nut should in the left over parts from the assembling.

Tags