1x1 Tall Glasses Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 1x1 Gridfinity module holds a wider pair of glasses.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 55
- Wydruki
- 4
- Wyświetlenia
- 348
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
This 1x1 Gridfinity module holds a wider pair of glasses. The stand is taller than its shorter version (shown in the second photo). The glasses are balanced over the center of gravity so it doesn't fall over.
It was designed using a coil to produce a helical path that I used in a sweep to create a stiff, compound curve.
In two of the photos a glasses stand is resting on a vanity base: https://www.printables.com/model/511814-gridfinity-1x1-vanity-base
This was printed using my spool rotator with Plasport three-color coextruded Silk PLA filament: https://www.printables.com/model/523118-spool-rotator
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity