1x1 Tall Glasses Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.24 – €2.74 net (excluding VAT)
For file: 1x1 Tall Glasses_0.2mm_PLA_MK3S_2h56m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.49 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 2.93 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This 1x1 Gridfinity module holds a wider pair of glasses.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 55
- Makes
- 4
- Views
- 349
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
This 1x1 Gridfinity module holds a wider pair of glasses. The stand is taller than its shorter version (shown in the second photo). The glasses are balanced over the center of gravity so it doesn't fall over.
It was designed using a coil to produce a helical path that I used in a sweep to create a stiff, compound curve.
In two of the photos a glasses stand is resting on a vanity base: https://www.printables.com/model/511814-gridfinity-1x1-vanity-base
This was printed using my spool rotator with Plasport three-color coextruded Silk PLA filament: https://www.printables.com/model/523118-spool-rotator
Based on the Gridfinity System from Zack Freedman: https://thangs.com/designer/ZackFreedman
https://www.youtube.com/c/ZackFreedman
License: CC BY-NC-SA 4.0 https://creativecommons.org/licenses/by-nc-sa/4.0/
#gridfinity