1 / 3
Simple Wall Mount For Propel Endeavor Pro Remote — zdjęcie 1
1 / 3

Simple Wall Mount For Propel Endeavor Pro Remote

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall mount for the Endeavor Pro remote.

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
166
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v2.0

Printed In PETG on Ender 3 Pro using Cura

0.28mm Layer Hight

With Brim

I used #6 x 1-5/8'' Screws

Just insert the top piece into the bottom one, there should not be a need for glue.

Then drill it into a wall.

Tagi