Triumph Daytona & Trident 660 Rear Foot Peg Plate Cover Blank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a blanking plate for use on a Triumph Trident 660 motorcycle when removing the rear foot pegs.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a blanking plate for use on a Triumph Trident 660 motorcycle when removing the rear foot pegs. This is designed as an alternative to the R&G Blanking Plate BLP0047BK, which works on the Triumph Trident 660 and the '15-19' BMW S1000XR (untested). I have also added a Daytona version, as they should be the same size. Please let me know in the comments if you try it out.
The thickness is at the minimum needed to keep the factory bolts from bottoming out.
Print Settings
Printer Brand: Prusa
Printer: Mini+
Rafts: No
Supports: No
Filament:
PETG Black
Category: Automotive
