QIDI X-Max Hotend 30mm Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this 30mm fan shroud/adapter to concentrate the small fans cooling on the heat-pip e heatsink to help prevent h
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 1092
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Summary
Designed this 30mm fan shroud/adapter to concentrate the small fans cooling on the heat-pip e heatsink to help prevent heat creep on the high temp extruder. This fan mount replaces the two 9mm spacers on the 30mm cooling fan.
Only additional parts added were 2x M3 - 12mm socket head screws to secure the back of the fan. They are optional, but I wanted to go the extra step to minimize any air leakage around the fan.
Change Log:
2021-07-23 Added a second stl with a wire tab off the fan shroud to hold the heater wires in place.
Print Settings
Printer:
QIDI X-Max
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament brand:
3DXTech
Filament color:
Black
Filament material:
3DMax ASA