Buckle for 40mm Webbing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buckle (belt-clip) for 40mm Webbing-Strap
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 329
- Wydruki
- 3
- Wyświetlenia
- 1270
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Buckle for 40mm Webbing-Strap
I was looking for a harness buckle for 40mm webbing similar to the buckles used on climbing harnesses. But since I couldn't find anything for sale at an acceptable price, I printed some myself.
The second part is simply pushed through the base buckle and then the webbing is pulled tight. My webbing has a width of 40mm and a thickness of approx. 1.6mm. I hope you can see from the pictures how the webbing is threaded.
All parts printed with PLA on Anycubic Kobra2
Nozzle 0,4mm - layerhigh 0,2mm - Infill 100% - Speed 120mm/s
Print parts with the flat side down - no supports needed.