LayersFactory
Zgłoś model
1 / 2
DUMMY 13 goes to COMIC CON - Tyrael V2.0 — zdjęcie 1
1 / 2

DUMMY 13 goes to COMIC CON - Tyrael V2.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mici

Mici

@Mici

Tyrael from the Diable games

Ocena
0 / 5
Polubienia
136
Pobrania
540
Wydruki
0
Wyświetlenia
3134
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Action Figures & Statues
Licencja
Standard Digital File License
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (258)Powiązane

12. Feb. 2024 V2.0:

Visual improvements

  • New scarf
  • New hood
  • New armor
  • scarf mounts with jewelry

21. Jan 2024 V1.1 :

  • Multi-part sword added

Based on DUMMY 13 Beta - Oct. 2023 

DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0

Get your Dummy 13 here: /model/593185

DUMMY 13 loves COMIC CON! 

So I have started to design a whole series of characters and costumes for DUMMY 13. This is another costume from the series "DUMMY13 goes to COMIC CON".

The aim is to preserve the charm and simplicity of Dummy 13.

Get more:

----------------------------------------------------------------------------------------------------------------

Content of TyDUMMel, sorry Tyrael:

  • Hood to use with an original black head
  • Big deadly sword
  • Light wings
  • Spikes 
  • Armor 
  • Scarf and mount
  • Other parts are standard parts

Printing:

I have provided a 3MF file (Prusa slicer) but please double check the settings.

Assembly:

  • Slide pieces of filament (same as the jewelry of the sword) into the scarf mounts and glue them from inside
  • Put on the scarf
  • Slide it into the armor
  • Cut off the filament pieces inside the armor and use glue if necessary
  • Sand the outer ends of the filament pieces
  • Use a hairdryer or lighter to heat the scarf slightly and give the scarf a realistic look
  • Stick and, if necessary, glue the wings onto the spikes and put them onto the armor
  • Use a hairdryer to bend the wings (see pictures)
  • Attach the sword blade to the handle and fix it with glue
  • Press in the inlay

Slide the head into the hood and press it in with gentle force on the chin.

If this is not possible, it is probably due to the following points:

  •  Check the inside of the hood to see if it has been printed cleanly and remove any filament debris that is sticking out
  • Has the brim been removed cleanly?
  • The elephant foot can cause the inner rim to be a little too narrow, just sand the inner rim down a little or work it with a knife

You can also see in the pictures:

DUMMY 13 - Acrobatics pedestal - Pose stand /model/692455

 

 

Tagi

tyraeldummy13