Ryobi Jigsaw Mount for Multiboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a Ryobi cordless jigsaw remixed for the Multiboard 3D printed storage system.
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 435
- Wydruki
- 3
- Wyświetlenia
- 1795
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mount for a Ryobi jigsaw designed for the Multiboard 3D printed storage system. The model can be printed in most any material and default settings.
The mount is attached to two Multiboard 9mm Big Thread Shank Head Bolts with 4 mm recessed nuts by 4 M4x16mm Hex Socket Head Cap Screws (similar style to the screws used in Prusa's printers).
The two Multiboard bolts are a remix of the original Multiboard bolt to add a 4mm recessed nut. Use these bolts to securely connect to the Multiboard and then the M4 screws to connect the mount to the bolts.
This is part of a family of Ryobi Multiboard mounts designed with a similar look and feel that mount the tools parallel to the wall with the labels facing out. This along with some creative position on the Multiboard presents a clean organized well designed aesthetic.