1 / 2
AOS 7 / AOS 5 Beeper/finder and ExpressLRS holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds a VIFLY Finder 2 Buzzer and Betaflight 2.4GHz ExpressLRS receiver between the 5mm standoffs (32mm apart).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Holds a VIFLY Finder 2 Buzzer and Betaflight 2.4GHz ExpressLRS receiver between the 5mm standoffs (32mm apart).
There are two versions, with and without 2.4GHz antenna holder on the side.
Optionally there is a bottom part which allows to route a cable (DJI O3 to cam) to the front. It will increase the whole height to 20mm, which will fit nice and tight.
