Can Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on handles for drink cans.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 315
- Wydruki
- 1
- Wyświetlenia
- 1649
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Post a make if you print! I would love to see it.
Very satisfying to drink from a can with this
For identification of who's drink is who's
For easier handling of drinks
Great for people with fine motor difficulties
Can snaps in with a satisfying click and holds steady while still being removable with ease
Ensure you print the right size for the cans you intend to use it with. If you would like one for a different can size just comment or message me on here with the can height and I will add one for said can size. The base part works with all sizes as it doesn't interface with the can. It is a somewhat tight fit with a calibrated printer but I recommend gluing it on.
Sizes:
330ml / 11.5oz / 115mm height - Europe Standard
12oz / 355ml / 122mm height - US Standard
375ml / 12.7oz / 130.8mm height - Australia Standard
16oz / 473ml / 157mm height - ‘Tall Boy’ US
Printing:
Print without supports. Print with 25% triangle infill and 3 perimeters. This results in the ideal amount of flex so that the can is easy to click in but still holds tight.
Optional but recommended: schedule a filament colour change on the first layer of the text to make it pop visually.
Details:
Ring on the bottom prevents tip-overs (Printed separately). You can print this ring with different filament for more customisation/personalisation.
Groves that fit the can: the can is a very snug fit and snaps in with a satisfying click and doesn’t rotate or move around on the base easily, though it is still easy to remove.