PiKVM DIY V2 Pi Zero 2 W with OLED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for PiKVM v2 with Raspberry Pi Zero 2 W, HDMI to CSI adapter and 128x32 OLED.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 1921
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Components used:
Raspberry Pi Zero 2W.
Display: https://www.aliexpress.com/item/1005006132661128.html
Flex cable: https://www.aliexpress.com/item/1005006070586087.html
HDMI to CSI-adapter: https://www.aliexpress.com/item/1005003033156483.html
It is a tight snap-fit. Only solder 2x3 pins to the Raspberry, not the fulll lenght header. Be careful with the HDMI-to-CSI-board. The lid needs to be carefully angled to get it down. Attach a HDMI-cable to the HDMI input to be able to fit/align the board to the small spikes in the base before pushing the lid down.
Printed with PLA and 0,2 mm layer height.
Tip: Enable the serial console via the USB. Then you have access to a terminal directly via the USB-cable in case there is any issue.
Some boards might not like double powering via USB and HDMI. My board works great with just one single USB-cable for power, mouse, keyboard and serial (terminal).