PiKVM DIY V2 Pi Zero 2 W with OLED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case for PiKVM v2 with Raspberry Pi Zero 2 W, HDMI to CSI adapter and 128x32 OLED.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 143
- Makes
- 2
- Views
- 1,921
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Components used:
Raspberry Pi Zero 2W.
Display: https://www.aliexpress.com/item/1005006132661128.html
Flex cable: https://www.aliexpress.com/item/1005006070586087.html
HDMI to CSI-adapter: https://www.aliexpress.com/item/1005003033156483.html
It is a tight snap-fit. Only solder 2x3 pins to the Raspberry, not the fulll lenght header. Be careful with the HDMI-to-CSI-board. The lid needs to be carefully angled to get it down. Attach a HDMI-cable to the HDMI input to be able to fit/align the board to the small spikes in the base before pushing the lid down.
Printed with PLA and 0,2 mm layer height.
Tip: Enable the serial console via the USB. Then you have access to a terminal directly via the USB-cable in case there is any issue.
Some boards might not like double powering via USB and HDMI. My board works great with just one single USB-cable for power, mouse, keyboard and serial (terminal).