PM-728VT Spindle Encoder Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spindle encoder mount from PM-728VT CNC conversion for rigid tapping.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Encoder mount for the Omron E6B2-CWZ1X on the PM-728VT.
Use shaft coupler and encoder mounting screws that come with the encoder.
Requires 2x 100T or 60T GT2 Pulleys or equivalent 1:1 ratio that is larger than the spindle top pulley diameter.
Requires 2x 1/2 x1-1/8 x5/16 inch R8-2RS Double Rubber Sealed Roller Bearings which take the load from the belt tension.
Requires lathe work to make the shaft for the pulley / bearings and to modify one of the GT2 pulleys to bolt onto the PM728 spindle belt pulley. A printable drill fixture is included for use with a drill press.
M4 x 14mm to improve bracket strength depending on print settings / direction.
Print PETG or PC in 4 walls w/ 25%+ infill. Top section (encoder mount side) is designed to be “cut” and then bolted back together with the M4x14mm screws for easier printing.