Prusa i3 Mk3 reverse Bowden extruder PTFE connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to allow connection of a Bowden tube to the top of the Prusa i3 Mk3S extruder cover
- Ocena
- 5 / 5
- Polubienia
- 115
- Pobrania
- 955
- Wydruki
- 25
- Wyświetlenia
- 4487
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments.
The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it doesn't interfere with the insertion and removal of filaments that don't need the Bowden tube (like PLA).
I'd suggest printing it with the threaded section uppermost, and supports turned on (including for bridging). You could print it the way it appears on the bed, but you will still need supports.
Hope it helps!